The INTERVAL DAYS irrigation plan allows your irrigation system to irrigate at interval days from 1 up to 98 days. You can add up to 6 starts per day, for this purpose set the desired hour for the watering to start and the desired length of irrigation. The plan will start counting the interval sequence for irrigation right after it is created, regardless of the specific calendar day.
Programming Steps
-
Plan Name – The “New Plan” name can be modified, by slightly touching it, the smartphone keyboard will scroll up, and the cursor will appear. Then, you can edit the name as desired. The plan name will be editable at any time you touch back the “New Plan” option.
-
Intervals day selection – it is possible to set interval frame-time from 1 up to 98 days. For example, if you want the ii.ri controller to start every 3 days, then choose 3 Days in the scroll down window.
-
Add start – as explained at the beginning of this chapter, the ii.ri app allows up to 6 daily irrigation cycles. By default, the app will show only one (Start 1). There are two specifications to be set for each cycle. Starting time and Duration for each watering cycle.
-
Start – this specification determines the exact hour that the ii.ri smartphone operated irrigation controller will start the watering. The ii.ri allows you to set time in Hours and Minutes as shown below.
-
Duration – this specification determines the exact time for the watering cycle to run. The ii.ri allows you to set time in Hours and Minutes as shown below.
-
Hour format – it is possible to set the starting time for watering from “00 to 23” when the time format has been set to 24hrs or from “00 to 11” when the time format has been set to AM/PM. For further details of time format options, please refer to chapters 4.3 and 4.4 “TIME FORMAT and LANGUAGE”.
-
When you have finished setting the Week Days irrigation plan, click “” to save the plan. It is possible to save as many plans as required. The plans will be saved on the smartphone memory where the ii.ri app is installed.
